Table of Contents

Strong. Tough. Durable. Versatile.

Polyurethane delivers important advantages over conventional elastomers and plastics – it is stronger, tougher, more durable, and more versatile. It’s better value than parts made with other materials, because they often crack, break, tear, swell, deteriorate, and abrade.


As a result, they can interrupt and slow down your business operation.


With customised cast or moulded urethane parts, you may never have to replace your parts again.


Tough, resilient materials; they can outperform steels and rubbers for abrasion resistance and can be moulded to any shape.

Microcellular pu’s have astonishing damping abilities, controlling shock, noise and vibration in the most arduous conditions.


We also offer both FDA compliant and metal detectable grades.

Welded Polyurethane

Simply give us a call or fill in the enquiry form below and one of our experts will give you all the advice and guidance to meet your Pu requirements.

Pu Enquiry Form

Pu Products we Supply

Click on the links below to download a data sheet on the different products.

With a hardness range of 30° Sh A to 75° Sh D we offer a wide range of Polyurethane Rod from stock tooling in our full colour range. Usually 300mm long, rod can be supplied from 12mm diameter upwards.

We offer a comprehensive range of fully welded FDA polyurethane sleeves, bellows and flanged connectors. We also now carry a clear FDA and ATEX approved polyurethane material.

Pu sheets are available in a range of hardness’s from 30° Sh A to 60° Sh D in a variety of sizes up to 4900mm long and 1600mm wide in a range of colours and options including metal detectable. N.B. Please check required sizes with us as some combinations may not be possible.

Due to it’s high wear resistance and load carrying capabilities, Polyurethane is often the preferred material of choice for scrapers, skirts and wear strips where any aggressive or abrasive material is present.

When it comes to wheel and roller recovery, Polyurethane is the material of choice for longevity. We offer a full grooving and cambering service. If required we can supply complete replacement rollers manufactured to your requirements.

Whether your requirement is for round, flat, profiled or twisted belts and bands, we supply them all. We can offer them endless or connectors are available for tubular bands.

Sometimes the solution can not be made from flat Polyurethane sheet. In this instance a moulded or cast part is the answer. Mouldings and castings are available in our full range of colours and hardnesses.

When standard rubber grades don’t offer the abrasion resistance required, we can supply gaskets cut from Polyurethane sheet including our FDA or metal detectable grades.

As with all polymers it is recommended that the type is tested for suitability as grades do vary.

We are happy to advise on any application, but final responsibility lies with the customer.

Scroll to Top