1. Home
  2. »
  3. Products
  4. »
  5. Hose and Ducting
  6. »
  7. Rubber Tubing

RUBBER

TUBING

RUBBER

TUBING
Rubber Tubing
Rubber Tubing

Table of Contents

Key Benefits

  • 10 extruded polymers/350 Variations
  • Hardness range from 30°Sh to 90°Sh
  • Five extrusion processes
  • Over 1000 id & od combinations
  • Wide range of sizes
  • Coiled, straight, or cut to length
  • Coloured options available
  • Bespoke Die service available for custom sizes

Our range of un-reinforced rubber tubing is vast, covering a range of polymers which includes Silicone, Neoprene, Viton®, EPDM, Nitrile and Natural.

Rubber tubing is used for a host of applications from simple transfer of water, to fuel pipes in engines and even for Bunsen burners in laboratories and schools.

The following lists show our large range of standard rubber tubing: however you can also choose from our bespoke service covering a wider range of polymers, sizes and order volumes.

Our processes allow us to extrude tubes from 0.5mm diameter, all the way up to 100mm, plus they can be supplied in either straight lengths or coils, dependent on the size.

We also offer a cutting service where tubing can be cut to shorter lengths either by hand, lathe, or automatic guillotine.

Our range of Peroxide cured silicone tubing is also available in a wide variety of colours.

Although this is our standard range of rubber tubing, we are able to offer alternative grades and sizes for customer specific applications. Please see our compounds page for a list of available polymers, but please note, some may not be suitable for extruding. Simply give us a call on 01625 573971 or fill in the form below and one of our technical team will advise accordingly.

Information Request

    Name*

    Telephone*

    Email*

    Enquiry

    Industrial Rubber Tubing - 70° Sh. A EPDM, Nitrile, Viton® 

    EPDM rubber tubing is suitable for a wide range of applications where resistance to ozone and UV are a requirement. It is resistant to many chemicals and solvents particularly water, phosphate ethers, ketones and alcohols together with various acids and alkalis. EPDM’s have good resistance to many corrosive chemicals, most inorganic chemical products, mineral acids, detergents, and glycol.

    Nitrile is used with some oils and has good resistance to inorganic chemical products except antioxidant agents and chlorine. With the increase in biofuel elements in petrol and diesel nowadays, it is no longer suitable for use in applications involving contact, due to increased swelling.

    Viton® is used almost exclusively where resistance to very high temperature is required and where resistance to petroleum and chlorinated solvents is necessary. It has excellent performance with acids and is suitable, dependent on grade, for a temperature range of -20° – +250° C continuous.

       EPDMNITRILEVITON®
    OUTSIDE DIA MMWALL THICKNESS MMBORE DIA MMPRODUCT CODEPRODUCT CODEPRODUCT CODE
    113EPDM/1X3NIT/1X3VT/1X3
    1.61.64.8EPDM/1.6X4.8NIT/1.6X4.8VT/1.6X4.8
    214EPDM/2X4NIT/2X4VT/2X4
    315  VT/3X5
    31.56EPDM/3X6NIT/3X6 
    416  VT/4X6
    428EPDM/4X8NIT/4X8 
    51.58EPDM/5X8NIT/5X8VT/5X8
    61.59EPDM/6X9NIT/6X9VT/6X9
    6312EPDM/6X12NIT/6X12 
    71.510EPDM/7X10NIT/7X10VT/7X10
    8212EPDM/8X12NIT/8X12VT/8X12
    9213EPDM/9X13NIT/9X13VT/9X13
    10214EPDM/10X14NIT/10X14VT/10X14
    12.53.2519EPDM/12.5X19NIT/12.5X19 

    STANDARD COIL LENGTH OF 10 METRES – VITON AVAILABLE IN 1M LENGTHS
    MINIMUM ORDER QUANTITIES APPLY
    ALL TOLERANCES TO BS3734:E1

    Santoprene™ Tubing for peristaltic applications

    Santoprene™ tubing is commonly used on peristaltic pump applications due to its excellent resistance to wear and abrasion, extending the pumping life which results in significant cost savings. It is a thermoplastic-rubber product which is non-toxic, complying with FDA CFR177.2600 and EC1935:2004 regulations, and will withstand sterilisation.

    • Temperature: -20°C up to +135°C
    • Highly durable
    • Excellent resistance to abrasion, wear and fatigue
    • Good resistance to ozone and ultraviolet radiation
    • Beige colour option is FDA CFR177.2600 and EC1935:2004 compliant and non-toxic
    BORE MMWALL MMO.D.MMPRODUCT CODE
    1.61.64.8SPT/1.6X4.8
    3.21.66.4SPT/3.2X6.4
    4.81.68SPT/4.8X8
    6.41.69.6SPT/6.4X9.6
    81.611.2SPT/8.0X11.2
    1.62.46.4SPT/1.6X6.4
    3.22.48SPT/3.2X8.0
    4.82.49.6SPT/4.8X9.6
    6.42.411.2SPT/6.4X11.2
    82.412.8SPT/8.0X12.8
    9.62.414.4SPT/9.6X14.4
    12.73.219.1SPT/12.7X19.1
    194.828.6SPT/19.0X28.6

    STANDARD COIL LENGTH 15M

    BS2775:1987 Tubing - Red Natural and black Neoprene

    Natural rubber tubing offers high tensile strength, good abrasion resistance and excellent low temperature operating range down to -50°C.

    Neoprene, or Chloroprene, which was the first synthetic polymer to be developed in the 1930’s offers a good combination of ozone resistance, medium resistance to oils and is good with water and alkalis.

    There is still a demand for imperial sizes, so we can offer these grades in both imperial and metric.

    BS2775:1987 TUBING – NATURAL AND NEOPRENE Metric Sizes

     

     

     

    RED NATURAL RUBBER

    BLACK NEOPRENE

    BORE DIA MM

    WALL THICKNESS MM

    OUTSIDE DIA MM

    PRODUCT CODE

    PRODUCT CODE

    3

    0.75

    4.5

    RT/N03 BS2775

    NT/N03 BS2775

    5

    1.5

    8

    RT/N05 BS2775

    NT/N05 BS2775

    6.5

    1.5

    9.5

    RT/N06.5 BS2775

    NT/N06.5 BS2775

    8

    2

    12

    RT/N08 BS2775

    NT/N08 BS2775

    10

    2

    14

    RT/N10 BS2775

    NT/N10 BS2775

    12.5

    2.25

    17

    RT/N12.5 BS2775

    NT/N12.5 BS2775

    16

    3.25

    22.5

    RT/N16 BS2775

    NT/N16 BS2775

    20

    3.25

    26.5

    RT/N20 BS2775

    NT/N20 BS2775

    25

    3.25

    31.5

    RT/N25 BS2775

    NT/N25 BS2775

    3

    3

    9

    RT/H03 BS2775

    NT/H03 BS2775

    5

    4

    13

    RT/H05 BS2775

    NT/H05 BS2775

    6.5

    5

    16.5

    RT/H06.5 BS2775

    NT/H06.5 BS2775

    8

    6

    20

    RT/H08 BS2775

    NT/H08 BS2775

    10

    7

    24

    RT/H10 BS2775

    NT/H10 BS2775

    12.5

    8.5

    29.5

    RT/H12.5 BS2775

    NT/H12.5 BS2775

    IMPERIAL TUBING (BS2775:1987 Material Specification)

     

     

     

    RED NATURAL RUBBER

    BLACK NEOPRENE

    BORE DIA MM

    WALL THICKNESS MM

    OUTSIDE DIA MM

    PRODUCT CODE

    PRODUCT CODE

    1.59

    0.8

    3.2

    IRT1/16X1/8

    INT1/16X1/8

    1.59

    1.59

    4.76

    IRT1/16X3/16

    INT1/16X3/16

    3.18

    1.59

    6.35

    IRT1/8X1/4

    INT1/8X1/4

    3.18

    2.38

    7.94

    IRT1/8X5/16

    INT1/8X5/16

    4.76

    2.38

    9.53

    IRT3/16X3/8

    INT3/16X3/8

    6.35

    2.38

    11.11

    IRT1/4X7/16

    INT1/4X7/16

    6.35

    3.18

    12.75

    IRT1/4X1/2

    INT1/4X1/2

    6.35

    6.35

    19.05

    IRT1/4X3/4

    INT1/4X3/4

    7.94

    2.38

    12.75

    IRT5/16X1/2

    INT5/16X1/2

    7.94

    3.18

    14.29

    IRT5/16X9/16

    INT5/16X9/16

    7.94

    3.97

    15.88

    IRT5/16X5/8

    INT5/16X5/8

    7.94

    5.56

    19.05

    IRT5/16X3/4

    INT5/16X3/4

    7.94

    7.14

    22.23

    IRT5/16X7/8

    INT5/16X7/8

    9.53

    1.59

    12.75

    IRT3/8X1/2

    INT3/8X1/2

    9.53

    3.18

    15.88

    IRT3/8X5/8

    INT3/8X5/8

    12.75

    1.59

    15.88

    IRT1/2X5/8

    INT1/2X5/8

    12.75

    3.2

    19.05

    IRT1/2X3/4

    INT1/2X3/4

    12.75

    4.75

    22.22

    IRT1/2X7/8

    INT1/2X7/8

    19.05

    6.35

    31.75

    IRT3/4X11/4

    INT3/4X11/4

    25.4

    6.35

    38.1

    IRT1X11/2

    INT1X11/2/65

    European Rubber Tubing (Including DIN 12865 Specification)

    STANDARD SIZES (mm)- RED 

    Natural rubber offers high tensile strength, good abrasion resistance and an excellent low temperature operating range, down to -50°C.

    INSIDE DIAWALLOUTSIDE DIAPRODUCT CODECOIL SIZE
    2,01,04,0ERT/2X410m
    3,01,05,0ERT/3X510m
    3,01,56,0ERT/3X610m
    4,01,06,0ERT/4X610m
    4,01,57,0ERT/4X710m
    4,02,08,0ERT/4X810m
    5,01,58,0ERT/5X810m
    5,02,09,0ERT/5X910M
    6,01,59,0ERT/6X910m
    6,02,010,0ERT/6X1010m
    7,01,510,0ERT/7X1010m
    7,02,011,0ERT/7X1110m
    8,02,012,0ERT/8X1210m
    9,02,013,0ERT/9X1310m
    10,02,014,0ERT/10X1410m
    12,03,018,0ERT/12X1810m
    14,03,020,0ERT/14X2010m
    15,03,021,0ERT/15X2110m
    16,04,022,0ERT/16X2210m
    18,03,024,0ERT/18X2410m
    20,05,030,0ERT/20X3010m
    25,05,035,0ERT/25X3510m
    30,05,040,0ERT/30X4010m

    Vacuum - Red Natural Rubber Tubing (Sizes shown in mm)

    These grades have a thicker wall, making them suitable for vacuum applications.

    INSIDE DIAWALLOUTSIDE DIAPRODUCT CODECOIL SIZE
    2,005,0012,00ERT/2X1210m
    4,004,012,00ERT/4X1210m
    5,005,015,0ERT/5X1510m
    6,05,016,0ERT/6X1610m
    7,05,017,0ERT/7X1710m
    8,05,018,0ERT/8X1810m
    10,05,020,0ERT/10X2010m
    15,07,530,0ERT/15X3010m

    Flame Retardant Neoprene Bunsen Burner Tubing with Reinforced Ends

    Our flame retardant, grey, Neoprene Bunsen burner tubing is used in a wide range of environments from educational establishments to chemical and pharmaceutical industries.

    We manufacture our high quality, flexible and durable Bunsen burner tubing here in the UK to exacting standards and class E1 extrusion tolerances. The range is produced at 5mm i.d. x 8mm o.d. and is stocked in four different lengths.

    In addition, we can also provide standard fittings or tailormade ones to suit your requirements.

    LENGTH IN MMPRODUCT CODE
    450CBT/450
    600CBT/600
    750CBT/750
    900CBT/900

    Translucent Platinum Cured Silicone Tubing 60° S.H. A

    MEDICAL GRADE NON-TOXIC WRAS APPROVED PERISTALTIC GRADE

    Silicone rubber is physiologically inert, thus making it the preferred choice of the medical, pharmaceutical and food processing industries. It can operate at a wide range of temperatures from -45° – +200° C continuously. It has excellent dry heat and ozone resistance plus is both FDA and EC1935 compliant.

    BORE MMWALL MMO.D. MMPRODUCT CODE
    113PCST/1X3
    1.50.52.5PCST/1.5X2.5
    1.513.5PCST/1.5X3.5
    1.61.64.8PCST/1.6X4.8
    214PCST/2X4
    2.514.5PCST/2.5X4.5
    30.754.5PCST/3X4.5
    315PCST/3X5
    31.56PCST/3X6
    3.215.2PCST/3.2X5.2
    3.20.84.8PCST/3.2X4.8
    3.21.66.4PCST/3.2X6.4
    416PCST/4X6
    428PCST/4X8
    4.51.67.7PCST/4.5X7.7
    517PCST/5X7
    51.58PCST/5.0X8.0
    61.59PCST/6X9
    6210PCST/6X10
    6.31.69.5PCST/6.3X9.5
    6.33.212.7PCST/6.35X12.7
    6.51.59.5PCST/6.5X9.5
    71.510PCST/7X10
    81.611.2PCST/8X11.2
    8212PCST/8X12
    9213PCST/9X13
    9.53.215.9PCST/9.5X15.9
    10214PCST/10X14
    102.515PCST/10X15
    12.52.2517PCST/12.5X17
    12.53.2519PCST/12.5X19
    163.2522.5PCST/16X22.5
    203.2526.5PCST/20X26.5
    253.2531.5PCST/25X31.5

    MINIMUM COIL LENGTH 5 M – STANDARD COIL LENGTH 10 M

    Coloured Silicone Tubing

    Our 75° shore A silicone tubing is available in a wide range of colours, white, blue, red, black, orange, green, yellow, and metallic black (Glimmersil). This range is widely used in automotive and industrial applications.

    Sizes up to 10mm bore can be used for vacuum applications.

    These tubes are safe for contact with food, being compliant to FDA 177.2600 and EC 1935/2004 standards.

    Inside Diameter (i.d.) mmWall Thickness mmOutside Diameter (o.d.) mm
    3.02.07.0
    4.02.08.0
    5.02.510.0
    6.02.511.0
    7.02.512.0
    8.03.014.0
    9.03.015.0
    10.03.016.0
    13.02.518.0
    16.02.521.0
    19.03.025.0
    22.03.028.0
    25.03.031.0

    All the above silicone grades are peroxide cured, but we can also offer platinum cured 60° Sh A in various options.

    You can download a useful .pdf file on our range here, if you’d like to print the range out.

    Scroll to Top